One screen for the morning
Today groups your work in four sections: waiting for you, to pick back up, in progress, to read. A single sentence at the top says where to start, from what has waited longest.
For freelancers and solo founders
Project Orchestrator opens on one screen: what waits for your answer, what stopped, what is moving on its own and what it costs. Each client keeps its own memory.
In the product todayCovered today
Proofs last checked on 7 Oct 2026
“I no longer know which conversation is waiting for my answer.”
Every assistant stops at a different point. You reopen the conversations one by one to find out, and the one that mattered is the last you open.
“It stopped on Friday and I only noticed on Monday.”
An assistant that asks permission or hits an error does not shout. The job sits there while you work on something else.
“I explain the same thing again in every new chat.”
Your rules, your client’s tone, the choice you made last week: you retype them each time, or the assistant guesses.
“I have no idea what all this is costing me.”
Each assistant has its own meter, in its own place. You find out when the bill arrives, not while the work is running.
Today groups your work in four sections: waiting for you, to pick back up, in progress, to read. A single sentence at the top says where to start, from what has waited longest.
When an assistant asks permission to do something, you read the exact request in Today and allow or refuse. When it asks a question, you pick an option or write your own answer.
A plan that stopped on an error or a budget limit shows what Resume will restart and what is already done. A conversation that was cut before your answer can be resumed with a message.
A new conversation on a project starts with a short recap: what the last one covered, the plans in progress, the recent notes. Notes and decisions that match your message are added to it.
Each running plan and each conversation shows what it cost, and a plan run stops at a spending limit you can raise while it runs. An unknown cost is shown as unknown, never as zero.
My tasks lets you pick the tasks you want to do today, put them in order, start them and tick them off. The list stays on this device.
Friday evening you left an assistant on a proposal for client A, another cleaning a spreadsheet for client B, a third drafting a newsletter for client C. Same Monday, without and with Project Orchestrator.
YouYou reopen three conversations to remember where each one stopped, and scroll to find the last message.
AssistantOne has been asking permission since Friday. Nothing moved over the weekend.
YouAnother stopped on its own and you cannot tell why, or what it already cost.
YouFor client C you start a fresh chat and retype the tone, the audience and what you decided last week.
Project OrchestratorToday opens with one sentence: an assistant has been waiting for your answer, with how long. The list below puts the oldest first.
YouYou read what it asks, exactly as written, and allow or refuse. It goes on.
Project OrchestratorTo pick back up shows the plan that stopped, the reason (an error, a budget limit), and how many tasks Resume will restart and how many are already done.
YouYou raise the limit if you want to, then press Resume. The running plan shows its cost as it goes.
Project OrchestratorThe new conversation for client C starts with a recap and the notes you saved, so you only say what is new.
You start from a list, not from memory. We give no figure for time saved: it depends on your work.
You say “my clients” and “my assistants”. Project Orchestrator uses its own words for the same things. In the product, the Today screen is written in French.
“my morning list”
Today
The screen you open first: what waits for you, what to pick up again, what is moving on its own.
“my clients, in one place”
Workspace
A group of projects that go together; Today filters by workspace.
“a client, a job”
Project
A body of work with its own plans, notes and decisions.
“the list of what the assistant will do”
Plan
How an objective gets done: ordered tasks and steps.
“a to-do”
Task
A unit of work inside a plan.
“my AI assistants, my Claude conversations”
Assistants
A conversation with an AI that works on your project; Today shows which ones are running.
“what I keep repeating to the assistant”
Note
What was learned: guidelines, gotchas, patterns, tips.
“pick it back up where it stopped”
Reprendre
The button that restarts a plan that stopped, and only what is left to do.
“what I accept to spend on a job”
Budget
The spending limit of a plan run: the run stops when it is passed, and you can raise it while it runs.
Words this page leaves out : MCP, knowledge graph, runner, wave, agent, pipeline
Today shows what waits for you first, then what to pick back up, then what is in progress, then what is to read. The product names them À traiter, À reprendre, En cours and À lire.
The day’s sentence points to the assistant that has waited longest, else to the oldest stopped work. There is no score and no invented priority.
Before you press it, Resume states how many tasks it restarts and how many are done. Blocked tasks are named and skipped, and the button is disabled while another plan is running.
A conversation that has been idle for more than 30 days is no longer listed in Today, so an old question does not stay on your screen.
A new conversation on a project loads the topics of the previous one, the plans in progress and the notes edited in the last 48 hours.
Each figure comes with where it comes from: reported, estimated, subscription or local. When nothing is known, nothing is shown instead of a zero.
Nothing here is hidden: these are the things you might assume and that are not true yet.
The Today screen and its buttons are written in French in the product today. The English labels on this page translate them.
It needs Docker Desktop (a free-to-download app that runs the services behind Project Orchestrator) and Claude Code with your own account. The first launch takes a few minutes while the services are downloaded.
There are no system notifications. You see what waits for you when you open Today or glance at the counter on the Today entry.
Today covers the conversations that go through Project Orchestrator. Assistants you use in other tools are not on the list.
One plan runs at a time. While one runs, Resume is disabled on the others, with the reason shown.
The memory holds what is written in notes and decisions, found by matching words. We have not measured how well it surfaces the right one, so check what the assistant was given.
The cost shown is the cost of the AI work, not a time tracker or a client invoice.
Today is yours alone. Sharing it with a client or a collaborator, with roles and access rights, is planned and not available.
Download the app for your system. You also need Docker Desktop and Claude Code with your own Claude account; the app can help you install both.
DownloadOn first launch it takes four screens: services, sign-in, chat, launch. The chat screen can install Claude Code if it is missing.
Read the quickstartA name is enough, and the folder is optional. Group your clients in a workspace so Today can filter by client.
Tell the assistant what you promised the client and ask for a plan. Then save one note with the thing you keep repeating: it is the first thing the next conversation will find.
Start with the sentence at the top. Answer what waits, resume what stopped, and look at what the running plans cost.
How it worksDownloading and using the app costs nothing, and its code is public under the MIT license. The assistant you talk to has its own cost, and Docker Desktop has its own terms: check them for your use.
No. By default the chat runs through Claude Code, which you install (the setup wizard can do it) and sign in to with your own Claude account. The cost of your conversations is billed by the engine you use, not by Project Orchestrator.
The memory of your projects is kept in a database that runs on your computer. What you write in a conversation is sent to Claude, as it would be in Claude Code itself.
No. Today lists the conversations that go through Project Orchestrator: its chat, its plans and the tasks it delegates. A conversation open in another window is not listed.
Not with a system notification: there is none. A counter on the Today entry shows how many assistants wait for you, and Today lists them when you open it.
You do not need to code to use it. Installing it asks for Docker Desktop and Claude Code, and the setup wizard guides you. A project does not need a folder: the field is optional and says to leave it empty if it is not a code project.
Yes, as an alpha. Claude Code stays the default and the most tried path. A conversation can also run on the native engine (any OpenAI-compatible model), Codex or an ACP agent such as opencode, and move from one to another with its history. That has only been tested against test servers, never against a real service, so we do not promise it.
Download
One-click install
There is no Project Orchestrator account to create.
Free · MIT license · Bring your own AISee what it costs
Version 0.0.19 · 13 Nov 2026
The app installs on a computer. Pick the one you use.
Prefer a terminal?
Homebrew · Mac and Linux. Installs orchestrator, orch and mcp_server.
brew install this-rs/tap/project-orchestratorDocker Desktop
Runs the database and the search engine the app relies on. The app starts them for you. Get Docker Desktop
Claude Code
The default engine for chat. The AI itself is not included: with Claude Code, you use your own Claude account, and the app can install it for you. Other engines (Codex, an OpenAI-compatible model, an ACP agent) are available from Settings — newer, in alpha. Get Claude Code
At first launch
A setup wizard in four short parts checks Docker, installs Claude Code if it is missing and downloads the search model.
Runs the two services that hold the project memory (Neo4j and Meilisearch).
Open the downloaded .dmg, drag Docker into Applications, then open Docker once and wait for the whale icon to stop moving.
Or in a terminal
brew install --cask dockerCheck that it works
Each line should print a version number. If you see « command not found », open a new terminal window and try again.
docker --versiondocker compose versionDocker must be running (open it once) before you start Project Orchestrator. Installation page of the publisher
The assistant Project Orchestrator works with. It uses your own Claude account.
Paste the command in a terminal. It installs everything it needs and asks for your password only if required.
Command
curl -fsSL https://claude.ai/install.sh | bashCheck that it works
Each line should print a version number. If you see « command not found », open a new terminal window and try again.
claude --versionRun claude once to sign in. Installation page of the publisher
Free · MIT license · Bring your own AI See what it costs
Try it: start a task in any window
Download
Pick the file for your system above. There is no account to create.
Open
Open the file. A setup wizard checks Docker, installs Claude Code if it is missing and downloads the search model.
Connect your AI
Chat runs on Claude Code by default; other engines are available from Settings (alpha). If it asks you to sign in, type this once in a terminal.
claudemacOS, Apple Silicon
The app for Macs with an M1 chip or later.
Project.Orchestrator_0.0.19_aarch64.dmg · 87.1 MB
macOS, Intel
The app for Macs with an Intel chip.
Project.Orchestrator_0.0.19_x64.dmg · 89.8 MB
macOS, Intel (macOS 10.15 to 13.3)
For Intel Macs on macOS 10.15 to 13.3. Without local embeddings: use an HTTP provider such as Ollama.
Project.Orchestrator_0.0.19_x64-legacy.dmg · 47.7 MB
Linux, AppImage
One file that runs on most Linux distributions (x86_64).
Project.Orchestrator_0.0.19_amd64.AppImage · 163 MB
Debian and Ubuntu, x86_64
Package to install with dpkg or apt.
Project.Orchestrator_0.0.19_amd64.deb · 98.1 MB
Debian and Ubuntu, arm64
Package to install with dpkg or apt, for ARM64 machines.
Project.Orchestrator_0.0.19_arm64.deb · 94.4 MB
Fedora and RHEL, x86_64
Package to install with dnf or rpm.
project-orchestrator-0.0.19-1.x86_64.rpm · 61.5 MB
Fedora and RHEL, arm64
Package to install with dnf or rpm, for ARM64 machines.
project-orchestrator-0.0.19-1.aarch64.rpm · 56.7 MB
Homebrew
Mac and Linux. Installs orchestrator, orch and mcp_server.
brew install this-rs/tap/project-orchestratorInstall script
Mac and Linux. Latest release into ~/.local/bin. Add --no-frontend for the light variant.
curl -fsSL https://raw.githubusercontent.com/this-rs/project-orchestrator/main/install.sh | shPowerShell
Windows. Installs into %LOCALAPPDATA%\orchestrator\bin.
irm https://raw.githubusercontent.com/this-rs/project-orchestrator/main/install.ps1 | iexDocker
Image for amd64 and arm64, with the web interface.
docker pull ghcr.io/this-rs/project-orchestrator:latest# API only, no dashboard: a version tag with the -api suffix# docker pull ghcr.io/this-rs/project-orchestrator:0.0.19-apiorchestrator, orch and mcp_server, with the web interface included. Lighter versions without it are on the release page.
macOS, Apple Silicon
Programs without the app window: orchestrator, orch, mcp_server
orchestrator-full-0.0.19-macos-arm64.tar.gz · 81.9 MB
macOS, Intel
Programs without the app window: orchestrator, orch, mcp_server
orchestrator-full-0.0.19-macos-x86_64.tar.gz · 82.8 MB
Linux, x86_64
Programs without the app window: orchestrator, orch, mcp_server
orchestrator-full-0.0.19-linux-x86_64.tar.gz · 91.1 MB
Linux, arm64
Programs without the app window: orchestrator, orch, mcp_server
orchestrator-full-0.0.19-linux-arm64.tar.gz · 85.6 MB
Windows, x86_64
Programs without the app window: orchestrator.exe, orch.exe, mcp_server.exe
orchestrator-full-0.0.19-windows-x86_64.zip · 92.8 MB
The desktop app starts Neo4j and Meilisearch in Docker for you. With the command line, one compose command does it: follow the quickstart.
More for developersWhat you should see. A list of checks. On the very first launch the Docker lines say “Setup pending”.
What to do. Wait for the setup to open: the start screen only checks what is installed.
What you should see. A green line says “Docker Desktop is running” under two cards, “Docker (recommended)” selected.
What to do. Keep “Docker (recommended)”. The app looks for Docker Desktop. When it says “Docker Desktop is running”, press Next. If it says Docker is missing or not running, use the button next to the message, then wait: the app checks again by itself. The services use the local ports 7474, 7687, 7700 and 4222, and the app itself uses 6600.
What you should see. Three choices (No authentication, Password, OIDC / OAuth), the first one selected.
What to do. On a computer only you use, keep “No authentication” and press Next. On a shared or public network, choose “Password” and set an email and a password: without sign-in, the app’s server accepts connections from your whole network.
What you should see. Claude Code CLI shows a green check once installed (until then: “Claude Code CLI is required” and an install button), and the search model is marked ready.
What to do. If “Claude Code CLI is required” is shown, press “Install Claude Code CLI”. Then let the app download the search model when it offers to; the size is shown on screen. Next unlocks when both are ready. If you have not signed in to Claude yet, see “If it does not work” below.
What you should see. A green “Configuration saved!” message and a “Restart Application” button.
What to do. Press “Generate Config & Save”. When “Configuration saved!” appears, press “Restart Application”. A switch on this screen controls whether the app checks for updates at start-up.
What you should see. A checklist (Docker Desktop, Neo4j, Meilisearch, NATS, Backend server) turning green one line at a time.
What to do. On this second start the app downloads the three images it runs on, then starts them. Later starts reuse the images and are quicker. When every line is green, the main window opens. If a line says “Taking longer than expected”, wait. If a “Continue anyway” button appears, see “If it does not work”.
macOS 11 or later on Apple Silicon (M1 and later). On Intel: macOS 13.4 or later, or macOS 10.15 to 13.3 with the older-macOS file, which has no local embeddings.
Download Docker Desktop from Docker’s page, open the file, drag Docker to Applications, then open it and wait until it says it is running.
Get Docker DesktopDocker Desktop is open and reports that it is running. It is Docker’s own screen, so it is not reproduced here.
Open the .dmg, drag Project Orchestrator to Applications, then open it from there. If macOS says it cannot check the app, we could not verify how the build is signed: allow it in System Settings, Privacy & Security, with “Open Anyway”.
The three problems you are most likely to meet, with what the app shows.
What you see. The app says “Docker Desktop is not running” or “Docker Desktop is required”.
What to do.
What you see. Neo4j or Meilisearch stays “Unhealthy”, or the app says it failed to start services. The services need the local ports 7474, 7687, 7700 and 4222.
What to do.
Only if you are comfortable with a terminal, this shows which program uses the port:
lsof -i :7687What you see. The setup says “Claude Code CLI is required”, or the chat says it has no Claude login.
What to do.
Type this and press Enter:
claudeWindows, 64-bit.
Download Docker Desktop from Docker’s page, run the installer, then start Docker Desktop from the Start menu and wait until it says it is running.
Get Docker DesktopDocker Desktop is open and reports that it is running. It is Docker’s own screen, so it is not reproduced here.
Run the installer and follow the wizard, then start Project Orchestrator from the Start menu. Windows may show “Windows protected your PC” because no signing certificate is set in the build configuration: choose “More info”, then “Run anyway” if you trust the download.
The three problems you are most likely to meet, with what the app shows.
What you see. The app says “Docker Desktop is not running” or “Docker Desktop is required”.
What to do.
What you see. Neo4j or Meilisearch stays “Unhealthy”, or the app says it failed to start services. The services need the local ports 7474, 7687, 7700 and 4222.
What to do.
Only if you are comfortable with a terminal, this shows which program uses the port:
netstat -ano | findstr :7687What you see. The setup says “Claude Code CLI is required”, or the chat says it has no Claude login.
What to do.
Type this and press Enter:
claudeAppImage for Intel/AMD; .deb and .rpm packages for Intel/AMD and ARM64.
Follow Docker’s page for your distribution, then start Docker and wait until it says it is running. The app also recognises Docker installed without the Desktop application.
Get Docker DesktopDocker is running. It is Docker’s own screen, so it is not reproduced here.
For the AppImage: in your file manager, open the file’s properties and allow it to run as a program, then double-click it. For a .deb or .rpm: open it with your software installer, then start Project Orchestrator from your applications menu.
The three problems you are most likely to meet, with what the app shows.
What you see. The app says “Docker Desktop is not running” or “Docker Desktop is required”.
What to do.
What you see. Neo4j or Meilisearch stays “Unhealthy”, or the app says it failed to start services. The services need the local ports 7474, 7687, 7700 and 4222.
What to do.
Only if you are comfortable with a terminal, this shows which program uses the port:
lsof -i :7687What you see. The setup says “Claude Code CLI is required”, or the chat says it has no Claude login.
What to do.
Type this and press Enter:
claude